Big Creek, Florence Lake Dam - Close-up

You might also be interested in

• 

  Big Creek, Florence Lake Dam - Close-up

  Visual Materials

  Big Creek, Florence Lake Dam - Close-up of open seam at junction of angle buttress 10 and Arch 11 at elevation 7288. 1 1/8" barrel reinforcing steel exposed by chipping and cleaning out seam. This seam is directly opposite spurt noted on downstream side during inspection.

  photCL SCE 02 - 22169

• 

  Big Creek, Florence Lake Dam - Close-up

  Visual Materials

  Big Creek, Florence Lake Dam - Close-up of a portion of open seam on Arch 9 at elevation 7296 and 13' west of center line showing exposed loop of 3/8" reinforcing steel lying in day's work joint. Joint was dug out to approximately 1" in width with a short piece of wire.

  photCL SCE 02 - 22168

• 

  Big Creek, Florence Lake Dam - Close-up

  Visual Materials

  Big Creek, Florence Lake Dam - Close-up of open seam of extrados surface Arch 9 at elevation 7296 near crown of arch.

  photCL SCE 02 - 22165

• 

  Big Creek, Florence Lake Dam - Close-up

  Visual Materials

  Big Creek, Florence Lake Dam - Close-up view of section of open seam on Arch 9 at elevation 7296.

  photCL SCE 02 - 22166

• 

  Big Creek, Florence Lake Dam - Close-up

  Visual Materials

  Big Creek, Florence Lake Dam - Close-up of open joint on Arch 9 at elevation 7296 from intrados side of Arch. Section of seam shown is from approximately centerline to 15' east..

  photCL SCE 02 - 22177

• 

  Big Creek, Florence Lake Dam

  Visual Materials

  Big Creek, Florence Lake Dam - View of open seam on Arch #36 at elevation 7308 after chipping out and ready for sealing with stiff grout.

  photCL SCE 02 - 22171